Connect With Us
               
PATENT-PENDING

  • FEATURES

    INTRODUCING OUR SMALLEST, MOST COMPACT POWER SUPPLY EVER!

    Since the release of the EMS400, two years ago, you have been asking us for a smaller, more travel-friendly power supply. Introducing the ES300 power supply, the smallest, most compact supply we've ever produced for powering coil and rotary tattoo machines. We've kept the same smooth, stable power, contemporary look-and-feel and high-end finishing you've come to expect from an Eikon power supply, in a much, much smaller package. In addition, the ES300 boasts an LED Visual Voltage Indicator and 2 on-the-fly switchable footswitch modes. Read on to learn more about the feature highlights...

  • CONTROL KNOB

    DIAL IN YOUR SETTINGS!

    Precision CNC'd from aircraft aluminium, the control knob is where you dial in your voltage settings. The ES300 has a forward sloping faceplate design that puts the large control knob in the perfect location and angle for quick and easy adjustments, while taking up very little of your valuable work space. Adjust the voltage up by turning it clockwise, adjust it down by turning it counter-clockwise. LED lights on the faceplate provide general feedback about the output voltage setting and also indicates when the footswitch circuit is active. Press and hold down the control knob for 3 seconds to toggle between footswitch modes. (Momentary and Maintained)

  • 36 WATTS OF POWER

    SMOOTH, CLEAN AND CONSISTENT POWER!

    The ES300 is specifically engineered to operate electric rotary and coil tattoo machines at their maximum efficiency. This ensures your machines operate on minimal voltage, therefore helping to decrease the likelihood of excessive heating.

    • Run electric rotary or coil tattoo machines without having to switch modes.
    • Smooth consistent output power for improved machine reliability and efficiency.
    • Polarized clipcord jack ensures power flows the proper direction through the polarized electric motors that are installed in many of today's rotary tattoo machines.

  • VISUAL VOLTAGE INDICATOR

    6 LED VOLTAGE METER BARS!

    The ES300 provides users with a visual voltage indicator using six "Voltage Meter Bars" on the faceplate. The voltage meter bars function as a scale with each bar representing a 3 volt increment. The first bar lights up when the output voltage is between 0 and 2.99 volts and the second bar lights up between 3 and 5.99 volts and so on.

  • REAR JACKS

    CABLES ROUTED OUT THE BACK

    The footswitch and clipcord connections have been positioned on the back of the ES300, along with the power adapter connector. This was done to help reduce the chance of the cords coming into contact or interfering with your workspace, it also makes covering the unit much easier.

    • Rear-facing jacks also reduce the likelihood of cleaning products entering the enclosure when spraying down the ES300 after tattooing.
    • Industry standard 1/4" Mono Jacks for plugging in your favourite footswitch and clipcord/connector cord.

  • 2 FOOTSWITCH MODES

    EASILY SWITCH FROM "MOMENTARY" TO "MAINTAINED" MODES!

    The ES300 includes both momentary and maintained footswitch modes.

    • Momentary footswitch mode is the default, it provides the typical press and hold footswitch function that most artists are used to.
    • Maintained footswitch mode is activated by pressing and holding the control knob for 3 seconds (until the "Footswitch Active Indicator" light starts to blink). Press the footswitch once to turn your machine on, and again to turn your machine off.
    • Maintained footswitch mode is great for those times when turning the machine on and off regularly is not necessary, or when you're working on a hard to reach spot and need to be able to move around the client.

  • SMALL FOOTPRINT

    LOW PROFILE AND SMALL PHYSICAL SIZE

    The ES300 has a super low-profile orientation and takes up very little of your valuable work space.

    • The ES300 boasts the smallest footprint of any Eikon power supply to date. (smaller than your iPhone!) Physical Dimensions of 5.125" x 2.25" x 2.0625" (L x W x H)
    • The ES300's power adapter is 55% smaller than that of the ES200 - making it even more convenient to travel with.
    • The thickness of the adapter cables have been dramatically reduced, making them easier to condense for packing.

  • EIKON'S "STICKY FOOT" BASE

    GUMSHOE "STICKY FOOT" BASE STAYS SECURELY PLANTED!

    The Gumshoe "Sticky Foot" attached to the base of the ES300 ensures the power supply stays securely planted where you put it on your workspace.

    • Made from a silicone material that is super tacky and will stick to hard surfaces like counter tops and work carts.
    • Gumshoe footpad helps protect against the power supply being bumped or tugged off a work station.
    • Stickiness can be "re-energized" by cleaning the silicone with water or alcohol and letting it air dry.
    • Will not leave a sticky residue on your work surface when removed.

  • WORLDWIDE COMPATIBILITY

    THE ES300 IS A GLOBETROTTER!

    Using the ES300 in countries other than North America is as easy as purchasing and plugging in the appropriate cordset for the region.

    • The ES300 power adapter automatically recognizes whether its plugged into 110 or 220 volt service and regulates accordingly.
    • International cordsets are sold separately:
      • ES300 British cordset - #3180
      • ES300 Australian cordset - #3181
      • ES300 Continental European cordset - #3182
      • ES300 North American/Japanese cordset - #3183
    • UL / CE / FCC approved.

  • MADE IN CANADA

    DESIGNED AND MANUFACTURED IN CANADA

    Designed, manufactured and assembled by Eikon in Canada. We manufacture the various parts, using our trusted suppliers and finally, assemble the ES300 right here, in our production department. We have full control over all levels of production and testing, which means that we can supply you with a product that will meet and exceed our self-imposed high levels of quality control.

View The 360 ° Interactive Video Tour